Specifications
Introduction of beam clamp :
Hanger: a frame used to suspend a workpiece and cause an electric current to the workpiece in electroplating and related operations.
Feasures:
1. Conform to ANSI/ASME safety standard.
2. Can be easy with threaded handle.
3. Clamp jaw is designed to reduce flange stress by distributing from I-beam flange edge.
4. Fit a wide range of flange width and beams.
5. Suspension bar provides lower headroom.
Optional Extra:
1. Can be supplied with shackle.
2. Specially design with faltened,reinforced jaws.
Lifting beam clamp for bridge
| Model | Capacity |
I-Beam width (mm) |
A Max. |
B Min. |
B Max. |
C |
D |
E |
F Max. |
F Min. |
G |
BC1 |
1 |
75-230 |
240 |
192 |
367 |
94 |
4 |
218 |
155 |
103 |
20 |
BC2 |
2 |
75-230 |
240 |
192 |
367 |
102 |
6 |
218 |
155 |
103 |
20 |
BC3 |
3 |
80-320 |
330 |
243 |
491 |
132 |
8 |
258 |
223 |
157 |
47 |
Certificate
We have achieved many awards both domestic and worldwide.Pls see our achievements on the chain sling as bellow :
To contact us
Thank you for visiting our website, further questions please feel free to contact us. We will do our best to support you all the time.